|Swivel Outer Diameter（mm）:||500||Ore Size（mm）， （-200 %）:||-1.02|
|Ore Density（%）:||10-40||Ore Pulp Transit Capability（m³/h）:||0.25-0.5|
|Dry Ore Throughput（t/h）:||0.03-0.125||Rated Energizing Voltage（V）:||8.3|
|Rated Exciting Power（Kw）:||10||Rotaing Pulsation Power（Kw）:||0.18|
|Pulse Stroke（mm）:||0-50||Pulse Speed （times/minute）:||0-400|
|Water Supplied Speed（Mpa）:||0.1-0.2||Water Consumption（m³/h）:||0.75-1.5|
|Cooling Water Processing（m³/h）:||1.5-2||Weight Of Biggest Parts（T）:||0.3|
magnetic separator for grinding machine,
magnetic roll separator
Wet Type High Intensity Magnetic Separator Machine 380V 50HZ
The Wet High Intensity Magnetic Separator is a high gradient vertical ring magnetic separator.
A DC current is applied to the coil to form a magnetic field in the separating compartment containing the matrix. The matrix is a select type of magnetic iron that fills the moving ring or carousel. The matrix becomes magnetically induced when within the electromagnet’s magnetic field. Slurried feed is introduced into the magnetic matrix, and is carried through the magnetic field. At this point, the feebly magnetic particles are attracted to the matrix by the very high magnetic gradient while the non-magnetic particles are allowed to pass through.
The tailings jig uses a high frequency, low pulse stroke to wash away the very weakly magnetic magnetic material from the matrix compartments into the tailings discharge launder. More strongly magnetic particles remain in the matrix and are carried by the rotation of the vertical ring into the middling area of the separating chamber. Here the middling jig which is adjusted for a lower frequency and a higher pulse stroke washes the moderately magnetic particles into the middling discharge launder. Only the most strongly magnetic particles are retained and rotated along with the separating ring. As the ring moves away from the separating chamber, the magnetic force is gradually reduced until it is very weak. This is the magnetic discharge area where an air/water flushing device will flush magnetic material from the magnetic matrix assembly compartments into the concentrate discharge launder.
|Swivel outer diameter(mm)||500|
(-200 mesh %)
|Ore pulp transit capability(m³/h)||0.25-0.5|
Dry ore throughput(t/h)
|Rated background magnetic field(T)||1.0|
|Rated energizing current(A)||1200|
|Rated energizing voltage(V)||8.3|
|Rated exciting power(Kw)||10|
|Swivel rotating power(Kw)||0.18|
|Rotating pulsation power(KW)||0.37|
|Cooling water processing(m³/h)||1.5-2|
|Weight of biggest parts(T)||0.3|
|dimension(length x width x height,mm)||1800*1400*1320|
Note: Technical data and specification subject to change. Special wet high intensity magnetic separator can be made on request, customers have to just send their technical data and application required for our engineers.
Contact Person: Mr. Bobby Tan
Tel: +86 15363435052